ยินดีต้อนรับทุกท่าน ติดต่อสอบถาม  ขอคำปรึกษาทางด้านวิศวกรรม เรามีเจ้าหน้าที่เฉพาะทางไว้บริการทุกท่าน 02-108-6880 , 091 698 9455

หินคลุก หิน1 หิน2 หิน3/4 หิน3/8 หินเกล็ด หินฝุ่น หินผุ พร้อมจัดส่งถึงหน้างาน
Pre-Order สินค้ามาใหม่ สินค้ายอดนิยม สินค้าแนะนำ
ติดต่อสอบถามราคาฝ่ายขาย 0 2108 6880-1,091 698 9455
ติดต่อสอบถาม

ผู้จำหน่ายวัสดุหินคลุก หิน1 หิน2 หิน3/4 หิน3/8 หินเกล็ด หินฝุ่น  วัสดุของเรามาจากแหล่งผลิต(โรงโม่) และจัดส่งโดยรถบรรทุก 10 ล้อ รถพ่วง 18 ล้อ รถพ่วง 22 ล้อ จึงมั่นใจได้ว่า หน่วยงานของท่านจะได้รับวัสดุที่มีคุณภาพตามหลักวิศวกรรม ไม่ใช่"วัสดุร้านวัสดุก่อสร้าง"ซึ่งเป็นวัสดุค้างผ่านการซะล้างน้ำฝนทำให้วัสดุ

ไม่มีคุณภาพในการทำ compaction ตามหลักวิศวกรรมได้ ดังนั้น หน่วยงานของท่านจะได้วัสดุที่มีคุณภาพต้องมาจากแหล่งผลิตเท่านั้น

"หยุดการใช้หินคลุกแบบผิดๆกันเถอะ"

ติดต่อสอบถามข้อมูลเพิ่มเติม

ฝ่ายขาย

Tel.0 2108 6880 -1 (จ-ศ)

Hotline 091 698 9455 (ส-อ)

เวลาทำการ 09.00 น.-18.00 น.

ID Line : patapee_pce

e-mail : patapee_thailand@hotmail.com

What is meant by this is the field-tested material, after placement and subgrade improvement, has a density equal to or greater than 95% of the laboratory density, as determined using the Standard Proctor (ASTM D698) or Modified Proctor (ASTM D1557). These laboratory tests determine the density of soils after the application of a “standard” amount of energy to get a maximum density for comparison with field testing. This density is not the maximum possible density, but rather a reference value for a specific material - Sand from pit X, Stockpile #4 on site, etc.

For example, if the standard proctor density of a material is determined to be 121.7 pcf in the laboratory, the field density tests should meet or exceed 115.6 pcf in the field to meet a 95% relative compaction specification.

Compaction is the removal of air voids from soil and to increase the density of soil by bringing particles close to each other.

Compaction is very important factor in on ground activities where foundation rests on soil.

95% compaction means that in-situ soil will be compacted to 95% of the maximum dry density by means of roller of different kinds (depending on the soil characteristics).

Usually we do proctor compaction test to find out the maximum dry density(MDD) and optimum moisture content (OMC) of a soil. soil used for foundation (in roads or building or any other activities ) should be compacted to attain these density so that it can take required loads.

In field compaction is done to bring soil to bring to MDD . 95 % means that final density after compaction should be 95% of MDD

ปิดปรับปรุงระบบความคิดเห็นชั่วคราว ขออภัยในความไม่สะดวก หากลูกค้าต้องการเปิดใช้งานระบบ กรุณาติดต่อ 02-8323222 กด 2